Epoxy Flooring in Edgewater, FL

Epoxy flooring in Edgewater often goes under a boat trailer. The city runs along the Indian River North next to Mosquito Lagoon, and life here leans toward the water. Wikipedia lists the boat industry among the city's local businesses, along with construction. So we see a lot of garages that hold a skiff, a trailer, outboard parts and fishing tackle, with a workbench along one wall.

What a boat garage needs from its floor

A trailer brings salt water, sand and grit inside. Outboard oil and fuel drip. Jack stands and trailer tongues put heavy point loads on small areas. A thin paint-on kit will not hold up to that. For these garages we usually recommend:

• A diamond-ground slab, so the coating bonds deep into sound concrete
• A thicker 100% solids epoxy base coat
• A full flake broadcast for grip and to hide grit
• A chemical-resistant polyaspartic topcoat that wipes clean of fuel and oil

If the garage is used as a real workshop with lifts or heavy tools, we may suggest our commercial and shop floor system instead.

Water from the ground and from the sky

Edgewater has a flood history that matters for floors. In October 2025, a stalled weather pattern dropped about 7 inches of rain on part of the city during a King Tide. City staff estimated about 30 homes had water intrusion, mainly in Florida Shores and nearby low areas. One Florida Shores resident told News 6 it was the third time in three years that water had come into her home, starting with Hurricane Ian in 2022.

A coating cannot keep floodwater out. What it can do is make cleanup faster. A sealed floor does not soak up dirty water, and silt hoses off the surface instead of settling into pores. If your garage has flooded, we inspect for lifted coating and staining and test the slab's moisture before we price new work. We will tell you if a drainage problem needs to be solved before a floor makes sense.

Florida Shores and the low areas

If you live in or near Florida Shores, let us know about any past water when you call. We will look at the garage threshold and how water reaches the door, and we will plan the coating to stop short where it should so the floor and door seal work together.

A growing city

Edgewater grew from 20,750 residents in 2010 to 23,097 in 2020, an increase of 11.3%. That means a mix of older slabs and newer construction. Older floors often have paint, oil stains and settlement cracks. Newer slabs tend to be smooth and dense, which coatings cannot grip until the surface is opened up by grinding. Either way, prep is where the money goes. We itemize it in the quote so you can see each step.

Cleaning after a day on the water

Rinse the trailer and boat outside if you can, so less salt water runs onto the garage floor. Squeegee standing water toward the door. Wipe up fuel and oil drips the same day. Once a month, a mop with a mild cleaner keeps salt from building up on the topcoat.

Outdoor living by the river

For lanais and patios, we use light colors and a textured topcoat. Riverfront decks get full sun and frequent rain, so a UV-stable polyaspartic finish keeps the color from fading and the texture keeps wet feet steady.

Call (386) 272-6158 or

Get a Free Estimate

and tell us what you keep in the garage.