Epoxy Flooring in Ormond-by-the-Sea, FL

Most of Ormond-by-the-Sea is little more than half a mile wide, so no home here is far from salt water. Epoxy flooring in Ormond-by-the-Sea has to deal with that from both sides: the Atlantic to the east along A1A, and the Halifax River to the west along John Anderson Drive. Salt air settles on everything, and sand finds its way under every garage door.

The peninsula's oldest housing

Wikipedia notes that nearly all of the area stayed undeveloped until the 1950s. Then it filled in fast. ACS figures summarized by Point2Homes show 26.5% of homes built in the 1950s and 16.5% in the 1960s, with a median year built of 1972. That makes the housing here older, on average, than in most nearby cities. About 68.6% of units are single-family detached homes.

Slabs that are 50 to 70 years old have usually been through a lot. We often find:

• Several coats of old garage paint, some of it peeling
• Rust stains from tools, bikes and fishing gear
• Hairline cracks and chipped edges near the door
• Low spots where water sits after a storm

All of it gets ground, patched and leveled before a coating goes down. That prep is where most of the work on an older peninsula floor goes.

Salt, sand and your garage

Salt in the air leaves a thin film on concrete that can hold moisture and weaken a bond. We clean and grind it away right before we coat. Afterward, a sealed floor is easier to keep clean. Sand and salt sit on top of the coating, where a hose and a push broom can clear them. We favor flake systems here because the texture keeps sandy feet from slipping and the color pattern hides grit between washes.

Get a Free Estimate

Seasonal homes and empty months

The 2020 census counted 5,852 housing units and found 34.4% of them vacant, a sign of how many homes here are second homes or seasonal places. If you spend part of the year elsewhere, we can schedule the work while you are gone. We will agree on access, move-out and photos ahead of time, and the floor will be cured and ready when you return.

Patios and screen rooms

Many peninsula homes have a concrete patio, a screened room or a walkway to a river dock. Our patio and pool deck coatings use light colors and a textured finish, so they stay cooler in the sun and grip when wet. They also resist the salt film that builds up near the ocean better than bare concrete does. The median age in Ormond-by-the-Sea is 60.5, and a non-slip outdoor surface is one of the most common requests we get here.

Choosing a system for a peninsula home

• Flake epoxy with a polyaspartic topcoat: the standard garage choice here. It hides sand, adds grip and handles sun through the open door.
• Full polyaspartic: faster curing, useful when you want the garage back the next day.
• Patio coatings: light, textured and UV stable for screened rooms, patios and walks to a dock.
• Metallic epoxy: best kept for indoor rooms, such as a converted garage or a hobby space.

Whichever you pick, we write down the prep, the coats and the total before we start.